Optimizing radiation safety in dentistry: Clinical recommendations and regulatory considerations.

BACKGROUND: The value of dental radiographs to oral health care decision making must be balanced with radiation safety to minimize patient exposure and occupational risk of oral health care providers. This review summarizes recommendations and regulatory guidance regarding dental radiography and cone-beam computed tomography. An expert panel presents recommendations on radiation safety, appropriate imaging practices, and reducing radiation exposure. TYPES OF STUDIES REVIEWED: A systematic search run in Ovid MEDLINE, Embase, and Cochrane Database of Systematic Reviews identified relevant topical systematic reviews, organizational guidelines, and regulatory reviews published in the peer-reviewed literature since 2010. A supplemental search of the gray literature (eg, technical reports, standards, and regulations) identified topical nonindexed publications. Inclusion criteria required relevance to primary oral health care (ie, general or pediatric dentistry). RESULTS: A total of 95 articles, guidance documents, and regulations met the inclusion criteria. Resources were characterized as applicable to all modalities, operator and occupational protection, dose reduction and optimization, and quality assurance and control. PRACTICAL IMPLICATIONS: Understanding factors affecting imaging safety and applying fundamental principles of radiation protection consistent with federal, state, and local requirements are essential for limiting patient ionizing radiation exposure, in conjunction with implementing optimal imaging procedures to support prudent use of dental radiographs and cone-beam computed tomographic imaging. The regulatory guidance and best practice recommendations summarized in this article should be followed by dentists and other oral health care providers.

Deep learning for tooth identification and numbering on dental radiography: a systematic review and meta-analysis.

OBJECTIVES: Improved tools based on deep learning can be used to accurately number and identify teeth. This study aims to review the use of deep learning in tooth numbering and identification. METHODS: An electronic search was performed through October 2023 on PubMed, Scopus, Cochrane, Google Scholar, IEEE, arXiv, and medRxiv. Studies that used deep learning models with segmentation, object detection, or classification tasks for teeth identification and numbering of human dental radiographs were included. For risk of bias assessment, included studies were critically analysed using quality assessment of diagnostic accuracy studies (QUADAS-2). To generate plots for meta-analysis, MetaDiSc and STATA 17 (StataCorp LP, College Station, TX, USA) were used. Pooled outcome diagnostic odds ratios (DORs) were determined through calculation. RESULTS: The initial search yielded 1618 studies, of which 29 were eligible based on the inclusion criteria. Five studies were found to have low bias across all domains of the QUADAS-2 tool. Deep learning has been reported to have an accuracy range of 81.8%-99% in tooth identification and numbering and a precision range of 84.5%-99.94%. Furthermore, sensitivity was reported as 82.7%-98% and F1-scores ranged from 87% to 98%. Sensitivity was 75.5%-98% and specificity was 79.9%-99%. Only 6 studies found the deep learning model to be less than 90% accurate. The average DOR of the pooled data set was 1612, the sensitivity was 89%, the specificity was 99%, and the area under the curve was 96%. CONCLUSION: Deep learning models successfully can detect, identify, and number teeth on dental radiographs. Deep learning-powered tooth numbering systems can enhance complex automated processes, such as accurately reporting which teeth have caries, thus aiding clinicians in making informed decisions during clinical practice.

Assessment of the Occupational Radiation Dose from a Handheld Portable X-ray Unit During Full-mouth Intraoral Dental Radiographs in the Dog and the Cat - A Pilot Study.

Occupational radiation protection is an important consideration in small animal clinics world-wide. With the increased use of portable handheld X-ray devices in veterinary dentistry, concerns related to occupational radiation protection are being raised. Annual occupational dose limits for dental workers are expressed as Total Dose Equivalent (TDE) or Effective Dose. The permitted TDE can vary depending on the anatomical region, ranging from 50 millisieverts (mSv) for the external whole body exposure dose to 500 mSv for external exposure of the skin or an extremity. Although several studies have been performed in human dentistry to establish the amount of backscatter radiation produced using portable handheld X-ray devices, no similar research has been conducted in veterinary dentistry. This study aimed to determine the TDE while acquiring a full mouth intraoral radiograph set in dogs and cats and to estimate the TDE for a handheld X-ray device's operator. For this, the backscatter radiation dose recorded by three sets of monitoring dosimeters located in strategic anatomical areas of the operator was assessed after taking one hundred intraoral radiographs in each group. The study concluded that the backscatter radiation levels were far below the permitted annual occupational doses in the three patient groups of this study. Even though the portable handheld X-ray unit was demonstrated to be a safe dental radiographic unit regarding backscattering radiation, the operator's eye, ovary, and breast regions were exposed to unnecessary radiation.

Sydney Blackman (1898-1971): a pioneer in dental radiology and radiography.

Sydney Blackman, was a consultant radiologist at the Royal Dental Hospital of London between 1931 and 1967. He contributed much to the advance of dento-maxillofacial radiology. His development of the 'rotograph' as the first commercially available dental panoramic machine established dental radiology on a level with medical radiology. Sydney was a major contributor to the establishment of the British Society of Dental and Maxillofacial Radiology.

Patient shielding during dentomaxillofacial radiography: Recommendations from the American Academy of Oral and Maxillofacial Radiology.

BACKGROUND: The American Academy of Oral and Maxillofacial Radiology established an ad hoc committee to draft evidence-based recommendations and clinical guidance for the application of patient contact shielding during dentomaxillofacial imaging. TYPES OF STUDIES REVIEWED: The committee reviewed monographs and reports from radiation protection organizations and studies that reported radiation dose to gonads, breasts, and thyroid gland from dentomaxillofacial imaging. RESULTS: Considering the absence of radiation-induced heritable effects in humans and the negligible dose to the gonads and fetus from dentomaxillofacial imaging, the committee recommends discontinuing shielding of the gonads, pelvic structures, and fetuses during all dentomaxillofacial radiographic imaging procedures. On the basis of radiation doses from contemporaneous maxillofacial imaging, the committee considered that the risks from thyroid cancer are negligible and recommends that thyroid shielding not be used during intraoral, panoramic, cephalometric, and cone-beam computed tomographic imaging. PRACTICAL IMPLICATIONS: This position statement informs and educates the reader on evolving radiation protection practices and provides simple, unequivocal guidance to dental personnel to implement these guidelines. State and local authorities should be contacted to update regulations to reflect these recommendations.

Stray radiation dose reduction using a backscatter shield and a rectangular collimator for a handheld intraoral X-ray unit.

The objective of this study was to study the dose reduction effect on occupational exposure of operators and public exposure other than operators when a backscatter shield and a rectangular collimator are used in conjunction with a handheld intraoral X-ray unit. The occupational exposure was reduced to 40% when the backscatter shield was attached to the cone-tip, to 13% when the rectangular collimator was attached and to 7.7% when the backscatter shield and rectangular collimator were used together. On the other hand, the public exposure was reduced to 20% when the rectangular collimator was attached, but the backscatter shield was not effective in reducing the public exposure. Attaching a backscatter shield is effective in reducing the occupational exposure, and a rectangular aperture is effective in reducing the occupational exposure, as well as the public exposure.

Fully automated film mounting in dental radiography: a deep learning model.

BACKGROUND: Dental film mounting is an essential but time-consuming task in dental radiography, with manual methods often prone to errors. This study aims to develop a deep learning (DL) model for accurate automated classification and mounting of both intraoral and extraoral dental radiography. METHOD: The present study employed a total of 22,334 intraoral images and 1,035 extraoral images to train the model. The performance of the model was tested on an independent internal dataset and two external datasets from different institutes. Images were categorized into 32 tooth areas. The VGG-16, ResNet-18, and ResNet-101 architectures were used for pretraining, with the ResNet-101 ultimately being chosen as the final trained model. The model's performance was evaluated using metrics of accuracy, precision, recall, and F1 score. Additionally, we evaluated the influence of misalignment on the model's accuracy and time efficiency. RESULTS: The ResNet-101 model outperformed VGG-16 and ResNet-18 models, achieving the highest accuracy of 0.976, precision of 0.969, recall of 0.984, and F1-score of 0.977 (p < 0.05). For intraoral images, the overall accuracy remained consistent across both internal and external datasets, ranging from 0.963 to 0.972, without significant differences (p = 0.348). For extraoral images, the accuracy consistently achieved the highest value of 1 across all institutes. The model's accuracy decreased as the tilt angle of the X-ray film increased. The model achieved the highest accuracy of 0.981 with correctly aligned films, while the lowest accuracy of 0.937 was observed for films exhibiting severe misalignment of ± 15° (p < 0.001). The average time required for the tasks of image rotation and classification for each image was 0.17 s, which was significantly faster than that of the manual process, which required 1.2 s (p < 0.001). CONCLUSION: This study demonstrated the potential of DL-based models in automating dental film mounting with high accuracy and efficiency. The proper alignment of X-ray films is crucial for accurate classification by the model.

Evaluating cone cut in rectangular collimation in intraoral radiography: application of ALADA and radiation stewardship.

OBJECTIVE: Rectangular collimation is a popular method used in intraoral radiography to reduce patient exposure to ionizing radiation. One of the perceived drawbacks of rectangular collimation is the possibility of an increase in cone cut errors ultimately impacting the diagnostic value of the radiographs. Thus, the aim of this study was to explore the frequency of cone cut errors in radiographs taken using a rectangular collimator. MATERIALS AND METHODS: Radiographs taken using PSP plates at Academic Center for Dentistry Amsterdam in the Netherlands by staff and students from January to December 2015 were assessed for cone cut errors. The radiographs were grouped as bitewings, front teeth, inferior premolars and molars, and superior premolars and molars and categorized as no cone cut, cone cut but diagnostically usable, and cone cut but diagnostically not usable. The results were entered into Microsoft Excel and analyzed thereafter. RESULTS: A total of 53,684 radiographs were assessed, 79% had no cone cut errors and consequently 21% had some degree of cone cut. However, the diagnostic value was unaffected in 18% of the radiographs with cone cut. Only 3% of the radiographs were deemed diagnostically unusable due to cone cut. The most common area of cone cut was in the premolar and molar areas while cone cut in the front teeth was least likely to be diagnostically unusable. CONCLUSION: Cone cut from the use of a rectangular collimator does not seem to result in an increase of diagnostically unusable radiographs. Thus, rectangular collimation should be preferred as it decreases the amount of radiation exposure to the patient while producing diagnostically usable radiographs and thus allowing the dental professional to adhere to the ALADA principle and practice radiation stewardship. CLINICAL RELEVANCE: Scientific rationale for the study: rectangular collimation is a method used to reduce patient exposure to ionizing radiation; however, this benefit is negligible if radiographs must be retaken due to cone cut errors that make the radiograph diagnostically unusable. Therefore, the aim of this study was to explore the frequency of cone cut in radiographs taken using a rectangular collimator. PRINCIPAL FINDINGS: cone cut was observed in 21% of the radiographs; however, only 3% of the radiographs were considered diagnostically unusable. PRACTICAL IMPLICATIONS: rectangular collimation does not result in a high number of diagnostically unusable radiographs and should be used to reduce patient exposure to ionizing radiation.

An application of the density standard and scaled-pixel-counting protocol to assess the radiodensity of equine incisor teeth affected by resorption and hypercementosis: preliminary advancement in dental radiography.

BACKGROUND: Equine Odontoclastic Tooth Resorption and Hypercementosis (EOTRH) syndrome is a dental disease where the radiographic signs may be quantified using radiographic texture features. This study aimed to implement the scaled-pixel-counting protocol to quantify and compare the image structure of teeth and the density standard in order to improve the identification of the radiographic signs of tooth resorption and hypercementosis using the EOTRH syndrome model. METHODS AND RESULTS: A detailed examination of the oral cavity was performed in 80 horses and maxillary incisor teeth were evaluated radiographically, including an assessment of the density standard. On each of the radiographs, pixel brightness (PB) was extracted for each of the ten steps of the density standard (S1-S10). Then, each evaluated incisor tooth was assigned to one of 0-3 EOTRH grade-related groups and annotated using region of interest (ROI). For each ROI, the number of pixels (NP) from each range was calculated. The linear relation between an original X-ray beam attenuation and PB was confirmed for the density standard. The NP values increased with the number of steps of the density standard as well as with EOTRH degrees. Similar accuracy of the EOTRH grade differentiation was noted for data pairs EOTRH 0-3 and EOTRH 0-1, allowing for the differentiation of both late and early radiographic signs of EOTRH. CONCLUSION: The scaled-pixel-counting protocol based on the use of density standard has been successfully implemented for the differentiation of radiographic signs of EOTRH degrees.

Bypass de instrumento endodôntico fraturado: relato de caso / Bypass of a fractured endodontic instrument: case report

Introdução: Mesmo com toda evolução tecnológica desses instrumentos, com o desenvolvimento das limas de liga de níquel-titanio (NiTi) e sistemas mecanizados, as fraturas podem ocorrer durante o preparo químico/mecânico. Existem três abordagens mais regulamente aplicadas para solucionar essa intercorrencia: tentativa de remoção do instrumento com ultrassom, tentativa de ultrapassálo (bypass) ou a obturação do segmento. Objetivo: Relatar um caso da técnica de bypass em instrumento fraturado no canal radicular. Descrição do caso: Paciente, sexo feminino, 47 anos, brasileira, sem condições sistêmicas associadas, foi encaminhada à clínica do Curso de Odontologia da UNIFENAS, Divinópolis, Minas Gerais, Brasil, para resolução de fratura de instrumento no canal mésio- vestibular do primeiro molar superior direito (16). Optou-se pelo tratamento pela técnica de bypass, que envolveu as seguintes etapas: anestesia, abertura, utilização de lima C-Pilot #08 para ultrapassar o instrumento fraturado, odontometria, escalonamento regressivo a partir da lima k#20, desinfecção com hipoclorito de sódio 5%, medicação com hidróxido de cálcio por 21 dias, agitação da substância irrigadora e obturação dos canais radiculares. Conclusão: O bypass ao instrumento é uma técnica conservadora, eficaz e uma solução adequada em casos de fratura de limas endodônticas dentro dos canais radiculares. Essa técnica visa preservar o máximo possível da estrutura dental original, evitando procedimentos mais invasivos.(AU)

Introduction: Even with all technological evolution of these instruments, with the development of nickel-titanium alloy (NiTi) files and mechanized systems, fractures can occur during chemical/mechanical preparation. There are three most commonly applie to resolve this complication: attempting to remove the instrument with ultrasound, attempting to bypass it, or obturating the segment. Objective: To report a case of bypass technique in fractured instrument in the root canal. Case description: A 47-year-old female patient from Brazil, with no associated systemic conditions, was referred to the clinic of the Dentistry Course at UNIFENAS, Divinópolis, Minas Gerais, Brazil, for resolution of an instrument fracture in the mesio-vestibular canal of the right upper first molar (16). Treatment was performed using the bypass technique, which involved the following steps: anesthesia, opening, use of a C-Pilot #08 file to bypass the fractured instrument, odontometry, regressive scaling from the k#20 file, disinfection with 5% sodium hypochlorite, medication with calcium hydroxide for 21 days, agitation of the irrigating substance and root canal filling. Conclusion: Instrument bypass is a conservative, effective technique and an adequate solution in cases of endodontic file fracture within root canals. This technique aims to preserve as much of the original tooth structure as possible, avoiding more invasive procedures.(AU)

Tratamento da classe III com disjunção maxilar e tração reversa da maxila: relato de caso clínico / Class III treatment weth maxillary disjunction and reverse maxillary traction: clinical case report

Objetivo: A má oclusão classe III de Angle se caracteriza por protrusão mandibular, retrusão maxilar ou pela combinação de ambas. Além de prejudicar a estética facial do paciente, essa má oclusão pode causar alterações funcionais e respiratórias. Uma das alternativas de tratamento para esses casos é o uso da máscara de Petit e do aparelho disjuntor de Hyrax. Este estudo tem como objetivo avaliar por meio da cefalometria ortodôntica se o tratamento com expansão maxilar em conjunto com a tração reversa da maxila diminuem os agravos estéticos e funcionais do paciente Classe III. Relato de caso: o relato de caso descrito no presente trabalho é sobre uma paciente que foi submetida a esse tratamento, sendo descrito por meio de análises cefalométricas, exames radiográficos, fotos intrabucais e achados clínicos. Considerações finais: A verificação dos resultados obtidos após o término do tratamento mostrou que a paciente teve uma boa adesão ao uso desses aparelhos e obteve resultados satisfatórios na sua função mastigatória, na sua oclusão e na sua estética facial e dentária.(AU)

Objective: Angle class III malocclusion is characterized by mandibular protrusion, maxillary retrusion or a combination of both. In addition to impairing the patient's facial aesthetics, this malocclusion can cause functional and respiratory changes. One of the treatment alternatives for these cases is the use of the Petit mask and the Hyrax breaker device. This study aims to evaluate, through orthodontic cephalometry, whether the treatment with maxillary expansion in conjunction with the reverse traction of the maxilla reduces the aesthetic and functional problems of Class III patients. Case report: the case report described in the present work is about a patient who underwent this treatment, being described through cephalometric analysis, radiographic examinations, intraoral photos and clinical findings. Final considerations: The verification of the results obtained after the end of the treatment showed that the patient had a good adherence to the use of these devices and obtained satisfactory results in her masticatory function, in her occlusion and in her facial and dental aesthetics.(AU)

Mesiodens: a propósito de dos casos / Mesiodens: two cases

El mesiodens es el diente supernumerario más común, localizado en la línea media maxilar entre los incisivos centrales. Su etiología es incierta y se han planteado múltiples teorías. El diagnóstico y tratamiento precoz permite la erupción espontánea de los incisivos permanentes, evitar las complicaciones asociadas, así como tratamientos posteriores más complejos. En este artículo se presentan dos casos de mesiodens de pacientes que acuden a la consulta de Pediatría de Atención Primaria (AU)

The mesiodens is the most common supernumerary tooth, located in the maxillary midline between the central incisors. Its etiology is uncertain and multiple theories have been put forward. Early diagnosis and treatment allows the spontaneous eruption of the permanent incisors, and avoids associated complications as well as more complex subsequent treatments. In this article, two cases of mesiodens in patients attending the primary care pediatric outpatient clinic are presented. (AU)

Monitoring cone-beam CT radiation dose levels in a University Hospital.

OBJECTIVE: To present patient dose levels for different CBCT scanners, acquired by a dose monitoring tool in a University Hospital, as a function of field of view (FOV), operation mode, and patient age. METHODS: An integrated dose monitoring tool was used to collect radiation exposure data [type of CBCT unit, dose-area product (DAP), FOV size, and operation mode] and patient demographic information (age, referral department) performed on a 3D Accuitomo 170 and a Newtom VGI EVO unit. Effective dose conversion factors were calculated and implemented into the dose monitoring system. For each CBCT unit, the frequency of examinations, clinical indications, and effective dose levels were obtained for different age and FOV groups, and operation modes. RESULTS: A total of 5163 CBCT examinations were analyzed. Surgical planning and follow-up were the most frequent clinical indications. For the standard operation mode, effective doses ranged from 35.1 to 300 µSv and 9.26-117 µSv using 3D Accuitomo 170 and Newtom VGI EVO, respectively. In general, effective doses decreased with increasing age and FOV size reduction. CONCLUSIONS: Effective dose levels varied notably between systems and operation modes.Operation mode selection and FOV size were indication-oriented, with larger FOV sizes election serving surgical planning and follow-up. Seeing the influence of FOV size on effective dose levels, manufacturers could be advised to move toward patient-specific collimation and dynamic FOV selection. Systematically monitoring patient doses could be recommended for steering future CBCT optimization.

[Intraoral radiography: qualitative study]. / Radiographies intraorales : étude de qualité.

When taking intraoral X-rays with a round collimator, the salivary glands and the thyroid gland are exposed to ionizing radiation. The rectangular collimator reduces the patient's radiation dose. This study aims to analyze the impact of the rectangular collimator on the quality of intraoral X-rays taken by students of the University Clinics of Dental Medicine (Geneva, Switzerland). Intraoral X-rays, performed by 8 students with digital intraoral phosphor plates, were collected and a quality score was assigned to each X-ray. A total of 130 intraoral radiographs were analyzed. Half of the radiographs were taken with a rectangular collimator and 24.6% (32/130) were bitewings. The mean quality score of bitewings taken with or without a collimator was 11 ± 1.8 and 10.3 ± 0.9, respectively. The mean quality score of apical X-rays taken with or without collimator was 11.6 ± 1.0 and 11.5 ± 2.1, respectively. X-rays taken with a rectangular collimator were of excellent or sufficient diagnostic quality for 95% of the bitewings and 100% of the periapical radiographs. This quality control study showing that students perform quality intraoral X-rays with a rectangular collimator could encourage clinicians to use this device as ameans of radiation protection in their daily practice.

The Impact of Dental Artificial Intelligence for Radiograph Analysis.

Dental artificial intelligence (AI) software can analyze and annotate radiographs in near real-time, transforming traditional gray-scale images into a color-coded diagnostic adjunct designed to draw the eye to potential pathologies. In this article, clinical leaders of various dental groups and practices discuss their experiences with implementing AI for radiograph analysis and to gain clinical insights. They describe how the use of AI for radiograph analysis aids dental providers in generating an accurate diagnosis, communicating more effectively with patients, and facilitating clinical consistency throughout a practice.

Reliability and accuracy of intraoral radiography, cone beam CT, and dental MRI for evaluation of peri-implant bone lesions at zirconia implants - an ex vivo feasibility study.

OBJECTIVES: To determine the reliability and accuracy of intraoral radiography (IR), cone-beam-computed tomography (CBCT), and dental magnetic resonance imaging (dMRI) in measuring peri­implant bone defects around single zirconia implants. METHODS: Twenty-four zirconia implants were inserted in bovine ribs with various peri­implant defect sizes and morphologies. True defect extent was measured without implant in CBCT. Defects were measured twice in IR, CBCT, and dMRI with the inserted implant by three experienced readers. Reliability was assessed by ICC, accuracy by the Friedman test, and post-hoc-Tukey's test. RESULTS: A comparable good to excellent intra- and inter-reader reliability was observed for all modalities (intra-/inter-rater-CC range for IR; CBCT; dMRI: 0.81-0.91/0.79;0.87-0.97/0.96;0.87-0.95/0.94). Accuracy was generally high, with mean errors below 1 mm in all directions. However, measuring defect depth in the mesiodistal direction was significantly more accurate in dMRI (0.65 ± 0.38 mm) compared to IR (2.71 ± 1.91 mm), and CBCT (1.98 ± 1.97 mm), p-values ≤ 0.0001 respectively ≤ 0.01. CONCLUSIONS: Osseous defects around zirconia implants can be reliably measured in IR/CBCT/dMRI in the mesiodistal directions. In addition, CBCT and dMRI allow assessment of the buccolingual directions. dMRI provides a comparable accuracy in all directions, except for the mesiodistal defect depth, where it outperforms IR and CBCT.

The use of protection measures in dento-maxillofacial radiology in Europe: a survey among experts.

Patient contact shielding to reduce radiation exposure to radiosensitive organs of patients is known to be used inconsistently in the field of dento-maxillofacial radiology (DMFR). There is an ongoing discussion if its use is still justified with regard to recent technical enhancements in the field. Thus, the aim of this study was to investigate the recommended and applied safety standards regarding dose protection measures in dental radiology within European countries. With an online questionnaire the use of safety measures, especially lead protection and collimation, in different patient groups (adults, children, pregnant women) was interrogated including leading experts in the field of DMFR. Among the 24 participants from 13 different countries, there was a tendency towards lead protection for intraoral radiography and towards collimation for extraoral radiography. Participants based their decision mainly on law and societal guidelines. Overall, the application of radiation protection measures varies within Europe. It seems safe to say that lead protection as a measure of radiation dose limitation is still recommendable even though collimation and technical advancements have led to great dose reductions. Collimation should be used more broadly and a standardization of protection measures and an update of radiation protection guidelines in Europe is desirable.

Pulpectomies with Iodoform Versus Calcium Hydroxide-Based Paste: A Preliminary Randomised Controlled Clinical Trial

ABSTRACT Objective: To compare clinical and radiographical pulpectomy outcomes in primary teeth filled with different pastes. Material and Methods: The sample included thirty-eight teeth indicated for pulpectomy due to irreversible pulp inflammation or necrosis from thirty patients (2 to 9 years old). The first appointment comprised chemomechanical preparation (2.5% sodium hypochlorite), smear layer removal (6% citric acid), intracanal dressing and temporary restoration. Seven days later, teeth were randomly assigned to filling with iodoform (IP) or calcium hydroxide with zinc oxide (CHZO) based pastes and temporarily restored. Final restoration (composite resin) occurred at the 3rd appointment. Data from baseline, 6 and 12 months were analysed using descriptive and inferential statistics (p≤0.05). Results: The overall frequency of success was 63.6% (n=21), with no significant difference between groups (IP=62.5% n=10; CHZO=64.7% n=11, p=0.59). Multiradicular teeth, overfilled canals and teeth whose coronal restoration have been lost were significantly associated with failure (p=0.01, p=0.04 and p<0.001, respectively). Conclusion: After 12 months, both pastes showed similar outcomes and can be used as good options for pulpectomies in primary teeth. Moreover, tooth location, extent of the root canal filling, and integrity of final restoration during the follow-up influenced the outcome of pulpectomies.